Products in the Ecore line include E-Cleaner, E-Strip, E-Finish, and E-Grip III. All of these products are designed for use with Ecore rubber surfacing products and are recommended as a system to ensure a smooth installation and years of enjoyment from your new floor. The use of E-Cleaner, E-Strip, E-Finish, and E-Grip III on your rubber floor will also help to uphold Ecore’s warranty and make for a worry-free investment.
Enviro Care Neutral Disinfectant is available in a one-gallon container and can be used to disinfect all surfaces – equipment, counter tops, and walls. It is an approved disinfectant under the U.S. Environmental Protection Agency’s Emerging Viral Pathogen Guidance, in response to COVID-19 and other viruses.
Coverage Rate: Makes 64 gallons of disinfectant
Please contact customer service to order: 833-888-1760
Highly concentrated Green Seal™ certified E-Cleaner is available in a one-gallon container and is effective for all routine cleaning jobs. It can be used for damp mopping, scrubbing, spray and wipe cleaning, or with a hand bucket and cloth.
Coverage Rates:Initial Cleaning – one gallon for every 2,000-square-feet of rubber (15-square-feet per ounce)
E-TAK 99 is a premium, pressure sensitive, multi-flooring adhesive and plasticizer migration blocker. E-TAK 99 can be used with LVT, 2mm Sheet Vinyl, and VCR Sound Control Underlayments (ECOsilence). E-TAK 99 can be used for pressure sensitive installations (tacky) or for wet/semi-wet installations.
Coverage Rates:Please contact customer service to order: 833-888-1760
E-Grip III is a revolutionary zero-VOC, low odor, one-component urethane adhesive formulated for use with Ecore surfaces. It features improved tack properties, helping to keep seams tight. E-Grip III has been specifically engineered to be solvent-free. With a moisture-cured, no-mix, non-sag and permanently elastic formula, it provides excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications.
LOBADUR® 2K InvisibleProtect is a two-part, water-based urethane that is designed to protect vulcanized composition rubber (VCR) floors from dirt, soiling, and scuff marks. This clear floor finish makes VCR surface layers easier to maintain and clean. This product is not designed to be applied in areas where there will be weight drops.
Coverage Rates:
Please contact customer service to order: 833-888-1760
E-Grip Tape is designed for ease of installation and immediate use with any Ecore product 8.5mm and under in thickness. Available in 29.5” x 131 LF rolls, this product can be applied efficiently and can support traffic and heavy loads immediately after installation. E-Grip Tape ensures a semi-permanent bond to a variety of substrates including some smooth existing floorcoverings.
Coverage Rates:
Please contact customer service to order: 833-888-1760
Fast acting with low odor, E-Strip removes multiple layers of finish, without harsh alkalies and other conventional components. E-Strip is available in a one-gallon container.
Coverage Rates:Heavy Soil Removal = one gallon for every 1,250-square-feet of rubber (10-square-feet per ounce)
E-Grip 99 is a one-part modified urethane adhesive available in 4-gallon pails.. This product is designed for extremely high moisture applications in a substrate with up to 99% RH. E-Grip 99 can be used with all VCR products and vinyl/LVT over concrete. This product is easy to trowel and requires no testing of the substrate’s pH (5-14).
Coverage Rates:
Please contact customer service to order: 833-888-1760
Available in 4-gallon pails E-Grip 95 is a moisture-cured one-part urethane adhesive that is formulated specifically for Ecore’s Vulcanized Composition Rubber (VCR) surfaces. This adhesive is ideal for applications where there is a high amount of moisture in the substrate with up to 95% relative humidity (RH).
Coverage Rates:
Please contact customer service to order: 833-888-1760
Creating a new standard in floor finishing, E-Finish combines an unequaled level of environmental preference with performance, surpassing conventional floor finishing technologies. It gives a tough, black-mark resistant shine with no powdering. E-Finish excels with all maintenance systems, including scrub and recoat, spray buff, and burnish. It contains no Polymers or Urethane and meets ASTM D2047-93 requirements for slip resistance.
Quad Blok Interlocking Connectors are used with 2.5-inch molded tiles. These connectors feature precisely located openings that interface with the corner leg understructure of molded tiles for a reliable easy-down/easy-up installation.
Please contact customer service to order: 833-888-1760
These transition strips are for non-ADA required applications.
Size Options:Please contact customer service to order: 833-888-1760
Quad Blok Interlocking Connectors are used with 1-inch molded tiles. These connectors feature precisely located openings that interface with the corner leg understructure of molded tiles for a reliable easy-down/easy-up installation.
Please contact customer service to order: 833-888-1760
Straight transition for use with ECOfit-Turf Plus and ECOfit Plus. For interlocking turf tile, straight transitions are available for a more finished look after trimming tabs from tile edge.
Size Options:Please contact customer service to order: 833-888-1760
ADA Ramps are available to make the transition between spaces easier and ADA compliant.
Size Options:Please contact customer service to order: 833-888-1760
Ecore’s Sanitary Base System creates an integrated floor system that supports sterile environments. This system provides a seamless and watertight transition between the wall and floor. The base is available in 7 colors. The system includes sanitary base, composition rubber underlayment and E-Flash Tape. Please visit the Strait Rx, Cosmos Rx, Infinity Rx, Forest Rx, Crossings Rx, or Aurora product pages to view the Tech Manuals that provide information on how to install this accessory.
Please contact customer service to order: 833-888-1760
Ecore Aurora Flash Cove system supports a sterile environment. It is an extension of the sheet flooring up the wall to form a base. This system includes unbacked Aurora, composition rubber underlayment, and E-Flash Tape. Please visit the Aurora product page to view the Tech Manual that provides information on how to install this accessory.
Please contact customer service to order: 833-888-1760
The Ecore Vinyl Flash Cove system is an integral accessory for a sterile environment. You can either extend the floor visual up the wall or select one of our complimentary visuals to form a sterile base. This system includes 2mm unbacked vinyl Rx, a vulcanized composition rubber underlayment, and E-Flash Tape. Please visit the Vinyl Rx product pages to view available visuals and Tech Manuals that provide information on how to install this accessory.
Please contact customer service to order: 833-888-1760
Our Perimeter Isolation Strips consist of expanded, closed cell, plank, polyethylene foam that meets ASTM D1056 and ASTM D3575 standards. This accessory is an economical, lightweight, flexible, compressible, resilient, nonabsorbent and inherent bond breaker that reduces lateral sound transmission. Perimeter Isolation Strip should be used with every ECOsilence installation.
Please contact customer service to order: 833-888-1760